è vuoto
è vuotoFrancesco P.
Recensito in Italia il 9 luglio 2024
Ottimo paraluce in metallo. ottimo acquisto.
Daniele
Recensito in Italia il 1 gennaio 2024
L' articolo corrisponde alla descrizione
Massimo Bernardoni
Recensito in Italia il 27 gennaio 2023
Avevo bisogno di un paraluce per un obiettivo comprato che ne era sprovvisto. L'originale sarebbe stato in plastica, questo è in metallo con attacco a vite quindi molto più utilizzabile anche per i filtri. Costa molto meno degli originali e fa un ottimo lavoro.
Vittorio
Recensito in Italia il 26 marzo 2023
Qualitativamente ben fatto. Ma, montato su una Panasonic fz300 risulta inutilizzabile a grandangolo esteso. La vignettatura presente, lo rende inutilizzabile.Reso avviato.
Cliente
Recensito in Italia il 20 marzo 2023
Perfetto e ben fatto
Mauro Martello
Recensito in Italia il 14 dicembre 2021
ottimo prodotto, buono il rapporto quaità przzo
Buyman79
Recensito in Italia il 2 giugno 2020
Robusto ed economico, molto meglio delle versioni in plastica vendute con gli obiettivi. Spedizione velocissima, oltretutto.
Matteo
Recensito in Italia il 1 settembre 2018
Ho acquistato questo paraluce per una lente 12-50 olympus visto che nel kit non era presente. Comincio con il dire che il paraluce e’ In metallo e si avvita veramente bene all’obiettivo, rendendolo sicuro da urti accidentali. Molto leggero e ben verniciato. Prezzo top.
Tim H
Recensito nel Regno Unito il 17 maggio 2018
Causes vignetting on a 50mm lens with a full frame sensor, so you'll need a shallower/wider hood in that scenario.Well constructed though, no problems with quality.
Andre
Recensito negli Stati Uniti il 10 agosto 2017
Perfect for my manual lenses, construction is very good and sturdy and color matches my lens perfectly.
Mark Biggar
Recensito in Canada il 11 luglio 2017
Full metal construction. Very sturdy. It cannot be mounted on backwards for compact storage. The lens cap fits snugly inside. Well worth the couple bucks.
Jon D Rolfson
Recensito negli Stati Uniti il 11 marzo 2017
Bought the FOTGA Screw Mount 52mm Standard Metal Lens Hood to try on a Canon first generation EF 50mm f/1.8 lens. These 50mm lenses were made with no provision for a bayonet mount lens hood. A collapsible rubber hood used to be attached to this lens, but it had an unfortunate propensity for slipping the threads and falling off. The FOTGA Screw Mount Hood screws directly into the filter thread and makes an attractive addition to the lens. The threaded inside of the hood serves to capture stray rays and lessen glare and flare. The original 52mm lens cap is too small to fit the threads on the open end of the hood, but a 55mm lens cap fits correctly. Installing screw-in hoods is a bit slower than bayonet mount hoods, but this is a good choice when a thread-mounted hood is the only option.
PhotoLynch
Recensito negli Stati Uniti il 21 maggio 2016
When I lost the lens shade for my Fuji 23mm f1.4 lens while on assignment I wasn't sure what I was going to do. Finding the proper replacement hood was proving to be rather difficult and costly. I had bought one of these metal lens shades for a vintage lens before and decided to give it a try.As opposed to the plastic petal hood that came on the Fuji lens before, I really like the way this metal ring looks. It gives the lens more of an old Leica look, which I like. Plus it makes my set up more unique! lol. I now have one of these on my 35mm lens too.The only thing I find an issue with is how the ring is designed so the front is not the same diameter as the threads on the rear. It's almost like a step up ring. Because of this the lens cap doesn't fit the outside of the ring or securely, instead you have to place it down inside of the shade where it kind of presses against the sides. It works, it's not as secure but I haven't had a single issue using it this way yet. Just wish they would not step up the outside ring.Overall, it's a great replacement lens hood shade and I'm happy with the quality and the price. Oh, and the style! 👍👍
Prodotti consigliati