è vuoto
è vuoto L'alimentatore automatico di fogli semplifica il processo di taglio sfuso caricando automaticamente i materiali in fogli nella macchina da taglio Silhouette. Posizionare fino a 20 fogli di materiale nel vassoio superiore e impostare il numero di copie da tagliare in Silhouette Studio. Quindi, l'alimentatore automatico di fogli carica ogni foglio nella macchina da taglio e lo espelle sotto il vassoio di caricamento o dietro la macchina da taglio per un lavoro di taglio senza soluzione di continuità e senza match. Taglia lo stesso design più volte o invia diversi lavori di taglio contemporaneamente utilizzando codici a barre. L'alimentatore automatico di fogli è compatibile con Silhouette Portrait 3 e Cameo 4.
Specifiche tecniche:
Dimensioni supporti:
A4: 21 cm. x 29,7 cm. 210 x 297 mm.
Lettera USA: 21,6 cm. x 28 cm. 216 x 279 mm.
Tipi di supporti compatibili: carta adesiva, carta fotografica e altri materiali in fogli rigidi. (I supporti arricciati o caricati elettrostaticamente potrebbero non essere utilizzati)
Spessore supporti compatibili: 0,18 mm ~ 0,26 mm.
Capacità massima del materiale: 20* / ≤ 4,4 mm (la capacità massima varia in base allo spessore del supporto.)
Macchine da taglio compatibili:
Silhouette Cameo 4
Ritratto Silhouette 3
Interfaccia: USB 2.0 ad alta velocità (nessuna compatibilità Bluetooth)
Dimensioni dell'unità: 27,3 cm. x 28,2 cm. x 6,9 cm. 27,3 x 28,2 x 6,9 cm.
Peso unitario: 1,14 kg.
Dimensioni di spedizione: 13 pollici. x 31,8 cm. x 12,1 cm. Dimensioni: 33 x 31,6 x 12 cm.
Peso della spedizione: 1,6 kg.
Richiede il software Silhouette Studio versione 4.5.117 o successiva
Requisiti minimi di sistema: Windows 8.1/10/11 o superiore o Mac OS X 10.14 o superiore, processore da 2 GHz, 4 GB di RAM, 2 GB di spazio disponibile su disco, porta USB, connessione Internet ad alta velocità (consigliata)
Contenuto della confezione:
Alimentatore di fogli
Cavo divisore di alimentazione
Base di posizionamento
Scheda di sicurezza
Conner Park
Recensito negli Stati Uniti il 4 marzo 2023
Does not work for die-cut designs. I wanted to increase efficiency by cutting sticker sheets that contain both kiss cut and die cut settings in the same cut job, but this will only work for kiss cuts. The paper also jams very easily if not fed in properly. Overall great concept but not very functional.
Random Guy
Recensito negli Stati Uniti il 5 aprile 2023
As of April '23 on the latest software, using Cameo 4 - 12" (bought specifically to be compatible with this), Silhouette Business edition, and using third party gloss sticker paper (silhouette only offers matte).Out of about 20 attempts the auto feeder crumples the paper and jams - only gotten 4 clean cuts to work out of 20. Of those 4, 2 of which is didn't eject the paper far enough and ended up pulling it back in with the next job. I wanted this to work so so much. I could not find any sort of calibration, settings, or tuning to get this to work even on Silhouette Business edition. Tried rigging it at different angles and heights, to no avail.
Rachel Hoffman
Recensito negli Stati Uniti il 15 novembre 2022
Sheets do not feed into the cameo 4 properly. I've spent half the day trying to get it to work. Watched videos. Not user error. The sheets become crooked while they are feed into the cameo 4 machine. . $90 paper weight is all the sheet feeder is good for. Wish I would have messed with it sooner because the return window was up on Nov 4th.
Donza3D
Recensito negli Stati Uniti il 18 ottobre 2022
Trying to use new sheet feeder but WAAAAYYY too many problems on Cameo 4! Why does Silhouette make their machines so frustrating to set up??Problems: Anchoring base does not stay connected to Cameo 4; sheet feeder has to be propped up higher than flip-down feet as sheet goes into Cameo & when it comes out it goes OVER the sheet feeder; half the time it does NOT recognize reg marks (on same sheet it recognized before); left roller does not grip paper well enough so it gets pulled to the right & bunches up in machine & now it doesnt want to push the sheet into the machine at all.To say the setup directions are minimal is a gross inderstatement (again common with Silhouette's machines) they print them in a zillion languages on a single sheet but don't really tell you how to set it up properly in any language. I spent about an hour just looking online for vids & (as usual) they begin by assuming that the feeder once connected will just magically work as its supposed to. Unfortunately i have never found that to be the case with Silhouette machines.Definitely not a Silhouette noobie here. I actually LOVE my Cameo 4 altho it initially took 4 months before I could get it working (HINT it was a bad blade) but I've boxed the sheet feeder back up to return it. Will wait until after the next couple of "fixed" version updates are out before I even possibly consider investing in another one. And can they please make it Bluetooth & work with a mat so It's actually useful for something other than just kiss cutting stickers. I do not recommend.
isaiah russell
Recensito negli Stati Uniti il 13 ottobre 2022
I don't know why I thought this machine would work. 90% of the time IF it sucks the sticker paper through, it doesn't go under the rollers. It gets bunched up against them. The other 10% of the time the rollers suck it in crooked. Like most of their machines, they are a pain in the butt and waste loads of paper and ink.
Prodotti consigliati
Potrebbe piacerti anche